ETI Budget pH Knife Electrode

Budget Meat Knife pH Electrode – Ideal for Food & Agricultural Use Ideal for insertion into meat, cheese or similar Stainless steel sheathed Ø12 x 120mm Temperature operating range 6 to 60°C

ETI Budget pH Electrode

Budget pH Electrode Ideal for pH measurement of liquids and semi-solids Ideal for food processing, agricultural and laboratory applications Ø12 x 120mm Temperature operating range 0 to 60°C

EUTECH Elite CTS Conductivity / TDS / Salinity Cup-sensor Pocket Tester

Elite CTS Conductivity / TDS / Salinity Cup-sensor Pocket Tester   The Elite CTS cup-sensor pocket testers are ideal for flexible on-the-go conductivity, TDS, salinity and temperature testing in a compact, travel-ready design. Flexible testing option Measure conductivity, TDS or salinity with temperature Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 150 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors  

EUTECH Waterproof ELITE CTS PIN Conductivity/ TDS / Salinity/ Temp with ATC

Waterproof ELITE CTSPIN Conductivity/ TDS / Salinity/ Temp with ATC; (0 - 2000 µS/cm; 0 - 20.00 mS/cm)   Portable, waterproof tester that measures Conductivity, TDS, Salinity, Temperature. Suitable for applications such as cooling towers, laboratories, education, water testing, environmental monitoring.   Measures Conductivity, TDS, Salinity, Temperature. Comes with pin or cup sensor (choose from the dropdown). 1 push calibration. Large, clear 4 digit double line display. Waterproof. Auto hold readings. Convenient lanyard provision. Wide, leak proof base cap with fill line. Battery powered 4 x AAA. Easy to replace sensor. Carry case and full instructions supplied.

EUTECH Waterproof ELITEpH with ATC and Temperature Readout; ±0.01 pH resolution

Waterproof ELITEpH with ATC and Temperature Readout; ±0.01 pH resolution   Waterproof, elite pocket tester. Very convenient for field testing. Complete with lanyard provision for easy portability.   About Eutech Elite pH Tester Simultaneous display of pH and temperature. Waterproof, pocket tester that floats. Backlit large 4-digit double line LCD display. Auto hold. 1 push calibration. Transparent cap with fill line. AAA Battery powered. Lanyard provision for portability. Easy to replace sensor. Stable base to allow the tester to stand. Carry case included. Full instructions supplied.

EUTECH Waterproof EcoTestr Salt with ATC, 1 point Calibration

Waterproof EcoTestr Salt with ATC, 1 point Calibration   0 to 10.00 ppt Up to ±2% full scale accuracy IP67 waterproof – tester floats on water for easy retrieval Manual calibration option for better accuracy with near-to-sample calibrations Click-lock battery compartment requires no tools for battery replacements Hold function freezes reading temporarily for ease of recording Sensor protective cap that doubles up as a container for samples or calibration solution Applications: Aquaculture, Fish ponds (koi), Food processing, Pools and spas, Environmental monitoring and more!

Waterproof EXPERTCTS Conductivity/ TDS / Salinity/ Temp, with ATC

Waterproof EXPERTCTS Conductivity/ TDS / Salinity/ Temp, with ATC; (0 - 1990 µS/cm; 0 - 20.00 mS/cm) Large 4 digit double line display Simultaneous display of pH, conductivity, TDS, salinity and temperature Battery life, ready, and calibration indicators Automatic temperature compensation Auto buffer recognition and calibration Multi-language operational instructions  

EUTECH Waterproof ELITEORP Large Dual Display (-1000 to +1000 mV)

Waterproof ELITEORP Large Dual Display (-1000 to +1000 mV)   ORP / Redox tester that also measures temperature. Portable, waterproof and easy to operate. For use in a wide range of applications. Flexible testing option Measure ORP Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 250 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors                

EUTECH Calibration Kit Set for TN100IR

Calibration Kit Set for TN100IR (0.02, 20.0, 100, 800 NTU), 4x60mL

Milwaukee MA920B/1 Direct Stick Measurement pH Probe

Milwaukee MA920B/1 Direct Stick Measurement pH Probe The MA920B/1 probe is a Direct Stick measurement probe for use with the MW101 or MW102 PRO pH meters.

Milwaukee MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food with ATC

Milwaukee MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food with ATC   DESIGN FEATURES Fast easy to read results with large digital LCD readout Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH) Lightweight and portable Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple push button, automatic two-point calibration for increased accuracy Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi-solids with a screw on cap to ensure proper storage Rugged stainless temperature probe 3 feet probe cables for extra flexibility when testing Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

EUTECH ELITE PCTS pH/ Conductivity/ TDS / Salinity/ Temp Pocket Tester

ELITE PCTS pH/ Conductivity/ TDS / Salinity/ Temp   Flexible on-the-go pH, conductivity, TDS, salinity and temperature testing using durable Elite PCTS pocket testers for a variety of applications including agriculture, aquaculture, hydroponics and more!  Key Features Flexible testing option Measure pH, conductivity, TDS or salinity with temperature Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 150 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors

EUTECH Elite pH Spear pH Meter with Replaceable Electrode

Elite pH Spear pH Meter with Replaceable electrode Ideal for flexible on-the-go pH testing in a compact, travel-ready design for Measuring pH of Semi-Solid, High-Protein & Small Volume Samples. Key Features Flexible testing option Measure pH Large back-lit graphic display Waterproof Float if dropped into liquids Uses 4 x AAA alkaline batteries Average 250 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors  

Schaller Humimeter RH2 - Water Activity Meter Kit

Schaller Humimeter RH2 - Water Activity Meter Kit   Easy to use portable handled water activity meter to determine water activity (aw) in food. Key Features Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw-value Long stable humidity sensor Easy data storage at the portable moisture meter Analysis on the PC and printer available Optimal documentation of your quality Online-function, Hold function, manual data memory Automatic datalog for up to 10,000 logs with measuring point report The meter comes with a carry case and all relevant consumables required. It also comes with calibration certificates and a calibration control kit.

Eutech EcoTestr TDS Low and High with Single Display

EcoTestr TDS Low and High with Single Display  Get quick and accurate Total Dissolved Solids (TDS) measurements in the field, laboratories, and schools. Economical and easy to use, the Eutech EcoTestr TDS Series comes with adjustable TDS factor, allowing you to measure TDS in a wide range of applications such as hydroponics gardening, fish-farming, pools, electroplating and other water/wastewater applications. EcoTestr TDS High measures from 0 to 10.00 ppt EcoTestr TDS Low measures from 0 to 1990 ppm   Features 0 to 1990 ppm Adjustable TDS factor from 0.4 to 1.0 Up to ±1% full scale accuracy IP67 waterproof – tester floats on water for easy retrieval manual calibration option for better accuracy with near-to-sample calibrations Click-lock battery compartment requires no tools for battery replacements Hold function freezes reading temporarily for ease of recording Sensor protective cap that doubles up as a container for samples or calibration solution

Eutech pH 6+ pH/mV Meter Kit

Eutech pH 6+ pH/mV Meter Kit pH range 0.0 – 14pH mV Range -1000 to + 1000 mV Temperature range 0.0 to 100.0 ºC Resolution - 0.1 pH,  Temperature 0.1 ºC & 1mV Accuracy - ±0.1 pH across pH range,  ± 1 mV & ±0.5 ºC temperature Operating Temperature 0 to 50°C ATC - Automatic Temperature Compensation One button auto 3 point calibration (pH 4, 7 and 10) Auto buffer recognition Hold Function & auto off Protective rubber boot with stand included IP54 Splashproof rated & Shock resistant with boot on Large LCD display shows battery, calibration and temperature on screen Power - 4 X AAA alkaline batteries (included) Size & weight - 15.7 x 8.5 x 4.2 cm ; 255 g Warranty – 3 years Kit Includes: (also see picture) Eutech pH 6+ pH/mV meter General Purpose Single Junction Gel-Filled pH Combination Electrode, 12x110 mm, BNC Connector, 1 m Cable ATC Electrode, 1 m Cable Hard carrying case 1 x pH 4.01 & pH 7.00 Buffer Solutions 1 x Storage Solution 1 x Deionised (Rinse) Water

Eutech Waterproof pH 150 Meter pH/mV/Temperature Kit

Eutech pH 150 Meter pH/mV/Temperature Kit Waterproof Compatible pH buffer solutions pH range -2.00 – 16pH mV Range -2000 to + 2000 mV Temperature range -10 to 110.0 ºC Resolution - 0.01 pH,  Temperature 0.1 ºC & 1mV Accuracy - ±0.1 pH across pH range,  ± 0.2 mV & ±0.5 ºC temperature Operating Temperature 5 to 45°C ATC - Automatic Temperature Compensation One button auto 6 point calibration (pH 4, 7 and 10) Auto buffer recognition Hold Function & auto off Memory function – stores up to 150 measurements Protective rubber boot with stand included IP67 Water proof with rubber boot on Large LCD display shows battery, pH or mV with temperature and % slope Power - 2 X AA alkaline batteries (included) Aprox 700 hours Size & weight - 20 x 8.3 x 5.7 cm ; 500g Warranty – 3 years

EUTECH Expert Pocket pH Tester With ATC & LCD Display

EUTECH Expert Pocket pH Tester With ATC & LCD Display pH range 0.0 – 14pH Resolution 0.1 pH ±0.5 % accuracy across full pH range Operating Temperature 0 to 50°C Temperature accuracy ±0.5 ºC / ±0.9 ºF +1 LSD One button auto calibration - auto 3 point calibration (pH 4, 7 and 10) Automatic Temperature Compensation (ATC) – Yes Auto buffer recognition Hold Function LCD display simultaneously shows battery, calibration and temperature IP67 Waterproof rated – will float on water Secure cap with leak proof gasket Power - 4 X 1.5 V "A76" Micro alkaline batteries Size & weight - 17 x 4.5 x 3 cm 96 g Certified - CE, FCC Class A, ROHS-2 Warranty – 1 year

EUTECH EcoTestr pH2 Pocket pH Tester With ATC & LCD Display (with 3 point calibration)

EUTECH EcoTestr pH2 Pocket pH Tester With ATC & LCD Display pH range 0.0 – 14pH Resolution 0.1 pH ±0.1 % accuracy across full pH range Automatic Temperature Compensation (ATC) – Yes One button auto calibration - auto 3 point calibration (pH 4, 7 and 10) Auto buffer recognition Long-lasting sensor - technology prevents clogging and increases life span Operating Temperature 0 to 50°C Hold Function Auto-Off & LCD Display IP67 Waterproof rated – will float on water Power - 4 X 1.5 V "A76" Micro alkaline batteries Size 7 weight - 16.3 x 4.5 x 3 cm ; 90 g Warranty – 1 year

EUTECH PH Meter - EcoTestr pH1 Pocket pH Tester With LCD Display (Without ATC, 1 Point Calibration)

EUTECH EcoTestr pH1 Pocket pH Tester With LCD Display   pH range 0.0 – 14pH Resolution 0.1 pH ±0.1 % accuracy across full pH range ATC – Not for the pH1 (see Ecotestr pH2) One button auto-buffer recognition Calibration - auto 1 point calibration Long-lasting sensor - technology prevents clogging and increases life span Operating Temperature 0 to 50°C Hold Function Auto-Off & LCD Display IP67 Waterproof rated – will float on water Power - 4 X 1.5 V "A76" Micro alkaline batteries Size 7 weight - 16.3 x 4.5 x 3 cm ; 90 g Warranty – 1 year

ETI Beer Brewing Long Mash Thermometer Probe 1000mm - 2 Meter Long

ETI Beer Brewing Long Mash Thermometer Probe 1000mm - 2 Meter Long T-shaped handle reduced tip penetration probe. Made from stainless steel Type K thermocouple Response time – 17 seconds Max Temperature range -75 to 250°C Accuracy Rating - BS EN 60584-1:2013 Accuracy Level - ±1.5 °C between -40 & 375 °C Probe Length options 500, 1000, 1400 or 2000mm Probe Diameter 9.5mm with reduced diameter tip Made in the UK

ETI Thermometer Zip Pouch

Thermometer Zip Pouch Soft PVC imitation leather Zip fastener Loop attachment Size 46 x 80 x 180mm Protects your thermometer

ETI pH Buffer Solution

ETI pH Buffer Solution Used to check pH meters, testers & probes Supplied ready to use in 100ml bottles Available for 4.01, 7.00 and 10.01pH Colour coded

ETI pH Buffer Capsules (pack of 10)

ETI pH Buffer Capsules - pack of 10 pH buffer capsules For use to check pH meters, testers & probes Supplied in convenient 10 capsule pack Available for pH values 4.00, 7.00, 9.00 and 10.0 pH Each colour coded capsule makes 100ml of solution 

ETI Spear-shaped pH Electrode 6mm

Spear-shaped pH Electrode 6mm Interchangeable with 8000/8100 pH meters Ideal for pH measurement of soil/compost Suitable for food processing and agriculture Size - Ø6 x 120mm Temperature operating range 0 to 80°C

ETI Spear-shaped pH Electrode 12mm

ETI Spear-shaped pH Electrode 12mm Interchangeable with 8000/8100 pH meters Ideal for pH measurement of soil/compost Suitable for food processing and agriculture Size - Ø12 x 120mm Temperature operating range 0 to 80°C

ETI General Purpose pH Electrode

ETI General Purpose pH Electrode Interchangeable with 8000/8100 pH meters Ideal for testing liquids and semi-solids For general food processing, agricultural and laboratory applications Size - Ø12 x 120mm Temperature operating range 0 to 100°C

ETI pH PAL Plus pH Tester

ETI pH PAL Plus pH Tester Ideal for food processing and laboratories Compact design Ideal for everyday use Automatic calibration feature Easy to read 8 mm LCD display Display hold function Temperature operating range 0 to 50°C Four LR44 button cell batteries (included) 150 hours battery life We recommend also purchasing 7.00 pH buffer solution for calibration.

ETI 8100 Plus pH, Temperature & Mv Combination Meter Kit

ETI 8100 Plus pH, Temperature & Mv Combination Meter Kit Measures pH, temperature and Mv Robust waterproof case gives IP66/67 protection Manual / automatic temperature compensation Simple pH re-calibration 2 year guarantee Option to purchase meter on its own 2500 hours battery life Dimensions 32 x 71 x 141mm

ETI 8100 Combination pH and Temperature Meter Kit

ETI 8100 Combination pH and Temperature Meter Kit   Simultaneously shows pH & temperature on screen Automatic temperature compensation (ATC)  2 year guarantee Operating temperature 0ºC to 50ºC Operating humidity <80%rh 5000 hours battery life Dimensions 26 x 56 x 128mm Made to order - 10 - 14 working day delivery

ETI 8000 pH Meter With Interchangeable Electrode

ETI 8000 pH Meter With Interchangeable Electrode Comes with a budget pH electrode. Electrodes can be replaced or interchanged Simple and easy to use Automatic re-calibration feature 2 year guarantee ±0.05 pH accuracy Operating Temperature 0ºC to 50ºC Operating Humidity <80%rh 5000 hours battery life Dimensions 26 x 56 x 128mm /ul>