ETI Budget pH Knife Electrode

Budget Meat Knife pH Electrode – Ideal for Food & Agricultural Use Ideal for insertion into meat, cheese or similar Stainless steel sheathed Ø12 x 120mm Temperature operating range 6 to 60°C

ETI Budget pH Electrode

Budget pH Electrode Ideal for pH measurement of liquids and semi-solids Ideal for food processing, agricultural and laboratory applications Ø12 x 120mm Temperature operating range 0 to 60°C

ETI Thermapen Classic Glow-In-The-Dark Cover

Thermapen Classic Glow-In-The-Dark Cover   Protective glow in the dark silicone cover for the Thermapen Classic thermometer   Glows in the dark Protects against accidental damage Made from durable silicone rubber Integrated magnet at rear of the cover

ETI DOT Digital Oven Thermometer

DOT Digital Oven Thermometer   DOT digital oven thermometer with alarm for monitoring roast and BBQ meat   Easy to set up and use Audible alerts for perfectly cooked food Food probe included Magnetic - attaches to the exterior of the oven or BBQ for easy display Durable, water-resistant case   Large backlit LCD display Cook meat to perfection with the DOT leave-in oven meat thermometer, monitoring from outside of the oven or BBQ using the digital display. Ready to use in seconds, this alarm thermometer will ensure you never overcook your food again

ETI ThermaGuard Fridge Temperature Monitoring Thermometer

ThermaGuard Fridge Temperature Monitoring Thermometer   Two models available - single or dual external sensors Meets the European Standard EN 13485 2 point (-18, 0°C) UKAS Calibration Certificates available Programmable high & low audible alarms Records the max/min temperature

ETI ThermaLite Instant Read Food Probe Thermometer

ThermaLite Food Probe Thermometer   ThermaLite instant-read thermometer for day-to-day food and catering applications.   Fast and accurate readings High accuracy with a wide temperature range CalCheck 0.0 °C Function Free traceable certificate of calibration Water-resistant to IP66 Polygiene BioMaster product protection Meets the European Standard EN 13485 Ideal for HACCP compliance, the ThermaLite is a simple and accurate pocket thermometer.  

EUTECH Elite CTS Conductivity / TDS / Salinity Cup-sensor Pocket Tester

Elite CTS Conductivity / TDS / Salinity Cup-sensor Pocket Tester   The Elite CTS cup-sensor pocket testers are ideal for flexible on-the-go conductivity, TDS, salinity and temperature testing in a compact, travel-ready design. Flexible testing option Measure conductivity, TDS or salinity with temperature Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 150 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors  

EUTECH Waterproof ELITE CTS PIN Conductivity/ TDS / Salinity/ Temp with ATC

Waterproof ELITE CTSPIN Conductivity/ TDS / Salinity/ Temp with ATC; (0 - 2000 µS/cm; 0 - 20.00 mS/cm)   Portable, waterproof tester that measures Conductivity, TDS, Salinity, Temperature. Suitable for applications such as cooling towers, laboratories, education, water testing, environmental monitoring.   Measures Conductivity, TDS, Salinity, Temperature. Comes with pin or cup sensor (choose from the dropdown). 1 push calibration. Large, clear 4 digit double line display. Waterproof. Auto hold readings. Convenient lanyard provision. Wide, leak proof base cap with fill line. Battery powered 4 x AAA. Easy to replace sensor. Carry case and full instructions supplied.

EUTECH Waterproof ELITEpH with ATC and Temperature Readout; ±0.01 pH resolution

Waterproof ELITEpH with ATC and Temperature Readout; ±0.01 pH resolution   Waterproof, elite pocket tester. Very convenient for field testing. Complete with lanyard provision for easy portability.   About Eutech Elite pH Tester Simultaneous display of pH and temperature. Waterproof, pocket tester that floats. Backlit large 4-digit double line LCD display. Auto hold. 1 push calibration. Transparent cap with fill line. AAA Battery powered. Lanyard provision for portability. Easy to replace sensor. Stable base to allow the tester to stand. Carry case included. Full instructions supplied.

EUTECH Waterproof EcoTestr Salt with ATC, 1 point Calibration

Waterproof EcoTestr Salt with ATC, 1 point Calibration   0 to 10.00 ppt Up to ±2% full scale accuracy IP67 waterproof – tester floats on water for easy retrieval Manual calibration option for better accuracy with near-to-sample calibrations Click-lock battery compartment requires no tools for battery replacements Hold function freezes reading temporarily for ease of recording Sensor protective cap that doubles up as a container for samples or calibration solution Applications: Aquaculture, Fish ponds (koi), Food processing, Pools and spas, Environmental monitoring and more!

EUTECH Waterproof ELITEORP Large Dual Display (-1000 to +1000 mV)

Waterproof ELITEORP Large Dual Display (-1000 to +1000 mV)   ORP / Redox tester that also measures temperature. Portable, waterproof and easy to operate. For use in a wide range of applications. Flexible testing option Measure ORP Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 250 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors                

Milwaukee MA920B/1 Direct Stick Measurement pH Probe

Milwaukee MA920B/1 Direct Stick Measurement pH Probe The MA920B/1 probe is a Direct Stick measurement probe for use with the MW101 or MW102 PRO pH meters.

Milwaukee MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food with ATC

Milwaukee MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food with ATC   DESIGN FEATURES Fast easy to read results with large digital LCD readout Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH) Lightweight and portable Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple push button, automatic two-point calibration for increased accuracy Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi-solids with a screw on cap to ensure proper storage Rugged stainless temperature probe 3 feet probe cables for extra flexibility when testing Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

Milwaukee MA873 Digital Refractometer for Glucose

Milwaukee MA873 Digital Refractometer for Glucose Product Details RANGE: 0 to 85% MASS | 0 to 80°C (32 to 176°F) RESOLUTION: 0.1% MASS | 0.1°C (0.1°F) ACCURACY: ±0.2% MASS | ±0.3°C (±0.5°F)   Fast, accurate results with digital dual level LCD readout. Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds. Simple one-point calibration using distilled or deionized water. Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets. Battery percent level indicator with automatic shut-off (batteries included). Ideal for winemakers, beverage producers, fruit and vegetable growers, syrup producers, and food producers. Measurement methodology recommended in ICUMSA Methods Book Water Resistant Rugged and Durable Portable No calibration required 1.5 second measurement time 

Milwaukee MA872 Digital Refractometer for Fructose

Milwaukee MA872 Digital Refractometer for Fructose Product Details RANGE: 0 to 85% MASS | 0 to 80°C (32 to 176°F) RESOLUTION: 0.1% MASS | 0.1°C (0.1°F) ACCURACY: ±0.2% MASS | ±0.3°C (±0.5°F)   Fast, accurate results with digital dual-level LCD readout. Easy measurement with just 2-3 drops of sample needed and results in less than 2 seconds Simple one-point calibration using distilled or deionized water. Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets. Battery percent level indicator with automatic shut-off (batteries included). Ideal for winemakers, beverage producers, fruit and vegetable growers, syrup producers, and food producers. Measurement methodology recommended in ICUMSA Methods Book Water-Resistant Rugged and Durable Portable No calibration required 1.5 second measurement time

Milwaukee MA871 Digital Brix Refractometer

PRODUCT SUMMARY Quick and precise results with the digital dual-level LCD readout of our device. With just 2-3 drops of sample required, receive results in less than 2 seconds. Experience hassle-free calibration with a simple one-point calibration using distilled or deionized water. Maintaining cleanliness is effortless with the stainless steel sample well that is easy to clean. The unit is rated IP65, ensuring it is "dust tight" and protected against water jets. Stay informed about battery life with the battery percent level indicator, and enjoy the convenience of automatic shut-off (batteries included). The measurement methodology employed follows the recommendations from the ICUMSA Methods Book, ensuring reliable and standardised results. With its water-resistant design, this device is suitable for use in various environments. Perfect for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers. Built to be rugged and durable, it can withstand challenging conditions. Take it anywhere you go, as it is lightweight and portable. No need for frequent calibration; this device eliminates that requirement. Experience the speed of a 1.5-second measurement time, providing efficiency and convenience.

EUTECH ELITE PCTS pH/ Conductivity/ TDS / Salinity/ Temp Pocket Tester

ELITE PCTS pH/ Conductivity/ TDS / Salinity/ Temp   Flexible on-the-go pH, conductivity, TDS, salinity and temperature testing using durable Elite PCTS pocket testers for a variety of applications including agriculture, aquaculture, hydroponics and more!  Key Features Flexible testing option Measure pH, conductivity, TDS or salinity with temperature Large back-lit graphic display Uses 4 x AAA alkaline batteries Average 150 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors

EUTECH Elite pH Spear pH Meter with Replaceable Electrode

Elite pH Spear pH Meter with Replaceable electrode Ideal for flexible on-the-go pH testing in a compact, travel-ready design for Measuring pH of Semi-Solid, High-Protein & Small Volume Samples. Key Features Flexible testing option Measure pH Large back-lit graphic display Waterproof Float if dropped into liquids Uses 4 x AAA alkaline batteries Average 250 hours of battery life Wide leak-proof cap serves as stable base Replaceable sensors One-year warranty for tester Six-month warranty for replacement sensors  

Schaller Humimeter RH2 - Water Activity Meter Kit

Schaller Humimeter RH2 - Water Activity Meter Kit   Easy to use portable handled water activity meter to determine water activity (aw) in food. Key Features Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw-value Long stable humidity sensor Easy data storage at the portable moisture meter Analysis on the PC and printer available Optimal documentation of your quality Online-function, Hold function, manual data memory Automatic datalog for up to 10,000 logs with measuring point report The meter comes with a carry case and all relevant consumables required. It also comes with calibration certificates and a calibration control kit.

Eutech pH 6+ pH/mV Meter Kit

Eutech pH 6+ pH/mV Meter Kit pH range 0.0 – 14pH mV Range -1000 to + 1000 mV Temperature range 0.0 to 100.0 ºC Resolution - 0.1 pH,  Temperature 0.1 ºC & 1mV Accuracy - ±0.1 pH across pH range,  ± 1 mV & ±0.5 ºC temperature Operating Temperature 0 to 50°C ATC - Automatic Temperature Compensation One button auto 3 point calibration (pH 4, 7 and 10) Auto buffer recognition Hold Function & auto off Protective rubber boot with stand included IP54 Splashproof rated & Shock resistant with boot on Large LCD display shows battery, calibration and temperature on screen Power - 4 X AAA alkaline batteries (included) Size & weight - 15.7 x 8.5 x 4.2 cm ; 255 g Warranty – 3 years Kit Includes: (also see picture) Eutech pH 6+ pH/mV meter General Purpose Single Junction Gel-Filled pH Combination Electrode, 12x110 mm, BNC Connector, 1 m Cable ATC Electrode, 1 m Cable Hard carrying case 1 x pH 4.01 & pH 7.00 Buffer Solutions 1 x Storage Solution 1 x Deionised (Rinse) Water

Eutech Waterproof pH 150 Meter pH/mV/Temperature Kit

Eutech pH 150 Meter pH/mV/Temperature Kit Waterproof Compatible pH buffer solutions pH range -2.00 – 16pH mV Range -2000 to + 2000 mV Temperature range -10 to 110.0 ºC Resolution - 0.01 pH,  Temperature 0.1 ºC & 1mV Accuracy - ±0.1 pH across pH range,  ± 0.2 mV & ±0.5 ºC temperature Operating Temperature 5 to 45°C ATC - Automatic Temperature Compensation One button auto 6 point calibration (pH 4, 7 and 10) Auto buffer recognition Hold Function & auto off Memory function – stores up to 150 measurements Protective rubber boot with stand included IP67 Water proof with rubber boot on Large LCD display shows battery, pH or mV with temperature and % slope Power - 2 X AA alkaline batteries (included) Aprox 700 hours Size & weight - 20 x 8.3 x 5.7 cm ; 500g Warranty – 3 years

ETI Protective Waterproof Therma Silicone Boot

ETI Protective Waterproof Therma Silicone Boot Manufactured from durable silicone Available in 6 colours, can be used to colour code thermometers Provides protection from scratches & scuffs Gives added grip

ETI Therma Waterproof Brewers Digital Thermometer Kit

ETI Therma Waterproof Brewers Digital Thermometer Kit   Kit Includes 1 x ETI Therma Waterproof IP66/67 Thermometer 232-101 1 x ETI Beer Brewing Long Mash Thermometer Probe 500mm - 2 Meter Long 133-136 1 X ETI Thermacouple Waterproof Penetration Probe For Liquids & Solids 143-162 1 x Therma Waterproof Silicone Boot 830-231 Thermometer Spec Temperature range:  -99.9 to 299.9°C (at 0.1°C), 300 to 1372°C (at 1°C) Reading speed: 3 seconds Resolution: 0.1 °C to 299.9°C thereafter 1°C Accuracy: ±0.4°C ±0.1% of reading Reading scale: Celsius Probe type: Compatible with K type thermocouple probes Sensor: K thermocouple Display type: 15mm LCD Backlight: Yes Size: 32 x 71 x 141mm Battery life: 10,000 hours Battery Type: 3 x 1.5 volt AAA Case material: Biomaster (Anti-bacterial ABS plastic) Water Proof Rating: Water proof rated to IP66/77 Conforms to standard:  EN 13485 Certification: FREE traceable National Standard Calibration Certificate Guarantee: 2 years Made in the UK Lead time of approx 14 working days applies to this order.

ETI Therma Waterproof IP66/67 Thermometer

ETI Therma Waterproof IP66/67 Thermometer   Note - Due to high demand and delays we are experiencing a lead time of approx. 10 working days for this item. **Click here for our Brewers Kit Spec Temperature range: -99.9 to 299.9°C (at 0.1°C), 300 to 1372°C (at 1°C) Reading speed: 3 seconds Resolution: 0.1 °C to 299.9°C thereafter 1°C Accuracy: ±0.4°C ±0.1% of reading Reading scale: Celsius Probe type: Compatible with K type thermocouple probes Sensor: K thermocouple Display type: 15mm LCD Backlight: Yes Size: 32 x 71 x 141mm Battery life: 10,000 hours Battery Type: 3 x 1.5 volt AAA Case material: Biomaster (Anti-bacterial ABS plastic) Water Proof Rating: Water proof rated to IP66/77 Conforms to standard:  EN 13485 Certification: FREE traceable National Standard Calibration Certificate Guarantee: 2 years Made in the UK Unit only - Probes not included

ETI Beer Brewing Long Mash Thermometer Probe 1000mm - 2 Meter Long

ETI Beer Brewing Long Mash Thermometer Probe 1000mm - 2 Meter Long T-shaped handle reduced tip penetration probe. Made from stainless steel Type K thermocouple Response time – 17 seconds Max Temperature range -75 to 250°C Accuracy Rating - BS EN 60584-1:2013 Accuracy Level - ±1.5 °C between -40 & 375 °C Probe Length options 500, 1000, 1400 or 2000mm Probe Diameter 9.5mm with reduced diameter tip Made in the UK

ETI Thermapen IR Dual Probe & Infrared Thermometer

ETI Thermapen IR Dual Probe & Infrared Thermometer Please note this product has not been medically tested and we cannot guarantee accuracy if being used for this purpose. Temperature range- Probe: -49.9 to 299.9°C Temperature range- IR: -49.9 to 349.9°C Display: LCD Auto rotating 360° Reading speed:  Approx. 3 seconds Probe Type: Dual IR and foldable penetration probe. Sleep & Wake Mode: Yes Size: 19 x 50 x 157mm Battery Life: 1000 hours Battery type: 2 x 3 volt CR2032 lithium coin batteries Calibration Certificate: Included for both probe & IR traceable to a recognised standard European Standard: EN 13485 Case material: ABS Biomaster plastic with anti-bacterial additive Guarantee: two years Made in the UK Probe Spec: Resolution:  0.1 or 1°C/°F - selectable Probe type: Foldable stainless steel  Ø3.3 x 110 mm Accuracy – probe: ±0.4°C (-49.9 to 199.9°C) otherwise ± 1°C Sensor: K thermocouple Infrared Spec: Accuracy: ±1°C (0 to 100°C) otherwise ±2°C or ±2% of reading whichever is greater Field of view: target ratio 5:1 Emissivity: (0.95 default) Adjustable between 0.1 to 1.00

ETI WiFi ThermaData Temperature Logger TD2TC

ETI WiFi ThermaData Temperature Logger TD2TC (Probes not included) Cost effective wireless temperature monitoring system Free software without licence fees or subscription charges Uses the latest WiFi technology Probe options that meet your precise needs Spec K thermocouple temp range: -100 to 1372°C T thermocouple temp range: -100 to 400°C Resolution: 0.1 °C/°F to 999.9°C thereafter 1°C Scale: Celsius/Fahrenheit Accuracy: ±0.4°C ±0.1% of reading Number Of Channels: 2 external Probe Type: Type K Or T (probes not included) Memory: 18000 or 2 x 9000 readings Sample rate: Fully programmable from 0.1 to 300 minutes Min/Max settings: Programmable with alarm via LED/screen & email notification Battery: 2 x AA Battery life: approx. 12 months Display type: 12 mm LCD with 2 LED's Size: 29 x 72.5 x 96mm Case material: ABS plastic Made in UK Guarantee: Two years

ETI Temperature Log Books

ETI Temperature Log Books A5 size Wipe clean front cover Organised by day Monday-Sunday, 1 week per page Three readings per day Each day has time, temp and signed by fields Each book can be allocated to a specific fridge/freezer Great for keeping records

ETI ChefAlarm® Straight Needle Penetration Probe

ETI ChefAlarm® Straight Needle Penetration Probe Temperature range: -50 to 300°C Reading speed: 5 seconds Probe type: Straight stainless steel needle penetration probe Probe size: 3.5mm x 114mm/305mm with stainless steel braided heat proof 1.2m long lead Accuracy: ±1°C (-20 to 120°C) Accuracy: ±2°C between –50 to -20 and 120 to 200°C Accuracy: ±3°C between 200 to 300°C Water resistance: Yes Guarantee: 1 year

ETI RayTemp 2 High Accuracy Non-Contact Thermometer

ETI RayTemp 2 High Accuracy Non-Contact Thermometer Please note this product has not been medically tested and we cannot guarantee accuracy if being used for this purpose. Temperature range: -49.9 to 349.9°C Resolution: 0.1°C & 1°C Measurement Scale: Selectable Fahrenheit/Celsius Accuracy: ±1 °C (0 to 100°C) Accuracy: All other temperature ranges ±2 °C or ±2 % whichever is greater Sensor: Infrared Target Ratio: 5:1 Display type: LCD 12mm Battery life: 5,000 hours Battery Type: 3 x AAA Size: 25 x 56 x 128mm Case material: ABS Antibacterial Biomaster Certification: FREE traceable calibration certificate Guarantee: 2 Years Made in the UK

ETI Sous Vide Kit

ETI Sous Vide Kit Temperature range: 0.1°C: -99.9 to 299.9°C Temperature range: 1.0°C: 300 to 1372°C Accuracy: ±0.4°C ±0.1% Resolution: Switchable 0.1°C & 1°C Temperature scale: Celsius Reading speed: 3 secounds Probe type: needle probe 60mm or 120mm Sensor: K thermocouple Display type: LCD 12mm Size: 25 x 56 x 128mm Battery life: 10,000 hours minimum Battery Type: 3 x AAA Case material: Biomaster ABS plastic IP Rating: IP64 when using protective boot Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI Sous Vide Foam Tape - 1 Metre Roll

ETI Sous Vide Foam Tape - 1 Metre Roll Self-adhesive Self-sealing foam Easy to use Size: 1 meter x 17mm wide x 6.4mm thick Food Contact Approved - EC Reg 1935/2004 & EU Reg 10/2011 Conforms to RoSH & REACH Legislation Use with our ETI Thermapen® 3 Sous Vide Thermometer

ETI Thermapen ONE Thermometer

PRODUCT SUMMARY Temperature range: -49.9 to 299.9°C Reading speed: 1 seconds Resolution: Selectable 0.1°C or 1°C Probe type: Folding 0.3 x 115 mm penetration probe Accuracy: ±0.4°C (-49.9 to 199.9 °C) otherwise ±1 °C Sensor: K thermocouple Display type: 360° Rotating LCD Backlight: Yes - automatic Size: 19 x 48 x 156mm Battery life: 2,000 hours (without back light) Battery Type: 1 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP66/67 – water proof Certification: FREE traceable calibration certificate Guarantee: 5 years Made in the UK

ETI Spear-shaped pH Electrode 6mm

Spear-shaped pH Electrode 6mm Interchangeable with 8000/8100 pH meters Ideal for pH measurement of soil/compost Suitable for food processing and agriculture Size - Ø6 x 120mm Temperature operating range 0 to 80°C

ETI Spear-shaped pH Electrode 12mm

ETI Spear-shaped pH Electrode 12mm Interchangeable with 8000/8100 pH meters Ideal for pH measurement of soil/compost Suitable for food processing and agriculture Size - Ø12 x 120mm Temperature operating range 0 to 80°C

ETI General Purpose pH Electrode

ETI General Purpose pH Electrode Interchangeable with 8000/8100 pH meters Ideal for testing liquids and semi-solids For general food processing, agricultural and laboratory applications Size - Ø12 x 120mm Temperature operating range 0 to 100°C

ETI pH PAL Plus pH Tester

ETI pH PAL Plus pH Tester Ideal for food processing and laboratories Compact design Ideal for everyday use Automatic calibration feature Easy to read 8 mm LCD display Display hold function Temperature operating range 0 to 50°C Four LR44 button cell batteries (included) 150 hours battery life We recommend also purchasing 7.00 pH buffer solution for calibration.

ETI 8000 pH Meter With Interchangeable Electrode

ETI 8000 pH Meter With Interchangeable Electrode Comes with a budget pH electrode. Electrodes can be replaced or interchanged Simple and easy to use Automatic re-calibration feature 2 year guarantee ±0.05 pH accuracy Operating Temperature 0ºC to 50ºC Operating Humidity <80%rh 5000 hours battery life Dimensions 26 x 56 x 128mm /ul>

ETI FoodCheck Thermometer With Penetration Probe

ETI FoodCheck Thermometer With Penetration Probe Temperature range:  -49.9 to 299.9°C Reading speed: Approx 2 seconds Resolution: 0.1°C Probe type: 130mm penetration probe Accuracy: ±0.4°C (-50 to 199°C) otherwise ±1°C Sensor: K thermocouple Display type: LCD Backlight: No Size: 25 x 56 x 128mm Battery life: 10,000 hours Battery Type: 3 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP64 when using boot accessory Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI Thermapen 3 SuperFast Probe Thermometer

ETI Thermapen 3 SuperFast Probe Thermometer Temperature range:  -49.9 to 299.9°C Reading speed: 3 seconds Resolution: Selectable 0.1°C or 1°C Probe type: Folding 0.3 x 115 mm penetration probe Accuracy: ±0.4°C (-49.9 to 199.9 °C) otherwise ±1 °C Sensor: K thermocouple Display type: LCD Backlight: No Size: 19 x 47 x 153mm Battery life: 1,500 hours (without back light) Battery Type: 2 x 3 volt CR2032 lithium coin cell Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: N/A – splash proof Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI TempTest 2 Smart Thermometer With Rotating Display

ETI TempTest 2 Smart Thermometer With Rotating Display Temperature range:  -49.9 to 299.9°C Reading speed: 3 seconds Resolution: 0.1°C Probe type: 03.3 x 100 mm penetration probe Accuracy: ±0.4°C (-49.9 to 200 °C) otherwise ±1 °C Sensor: K thermocouple Display type: 360° Rotating LCD Backlight: Yes - automatic Size: 17 x 47 x 120mm Battery life: 5,000 hours (without back light) Battery Type: 2 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP67 – water proof Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI TempTest 1 Smart Thermometer With Rotating Display

ETI TempTest 1 Smart Thermometer With Rotating Display Temperature range:  -49.9 to 299.9°C Reading speed: 3 seconds Resolution: 0.1°C Probe type: 03.3 x 80 mm integrated penetration probe Accuracy: ±0.4°C (-49.9 to 200 °C) otherwise ±1 °C Sensor: K thermocouple Display type: 360° Rotating LCD Backlight: Yes - automatic Size: 17 x 47 x 120mm Battery life: 5,000 hours (without back light) Battery Type: 2 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP67 – water proof Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI Waterproof NTC Thermistor Penetration Probe.

T-shaped NTC Thermistor Corkscrew Probe ideal for frozen foods etc. response time less than 6 seconds. maximum probe temperature 150°C. 8 x 100mm

ETI T-shaped NTC Thermistor Corkscrew Probe

T-shaped NTC Thermistor Corkscrew Probe ideal for frozen foods etc. response time less than 6 seconds. maximum probe temperature 150°C. 8 x 100mm

ETI Foil Between-Pack NTC probe

Foil Between-Pack NTC probe Thermometer sold separately. ideal for between packs & boxes etc. response time less than 3 seconds. maximum probe temperature 110°C. 40 x 50mm with 1000mm FEP lead

ETI Therma 3

Therma 3 Digital Thermometer FREE traceable calibration certificate wide temperature range 5 years minimum battery life price excludes probe - Purchased separately

ETI Therma 22 Plus Waterproof IP66/67 Thermometer

Therma 22 Plus Waterproof IP66/67 Thermometer   robust waterproof case offering IP66/67 protection excludes probe FREE traceable certificate of calibration included accepts type T thermocouple & thermistor probes backlight, max/min & hold functions

ETI Water Resistant Gourmet Thermometer

ETI Water Resistant Gourmet Thermometer   Temperature range:  -39.9 to 149.9°C Reading speed: 3 seconds Resolution: 0.1°C Probe type: 03.5 x 110mm folding penetration probe Accuracy: ±0.5°C (-39.9 to 124.9 °C) Sensor: Thermistor Display type: LCD Backlight: No Size: 20 x 52 x 155mm Battery life: 5000 hours Battery Type: 1 x 3 volt CR2032 lithium coin cell Case material: ABS plastic IP Rating: IP65 water resistant Guarantee: 1 year

ETI Thermapen Classic Protective Silicone Boot

Thermapen Classic Protective Silicone Boot Protects against accidental damage Made from durable silicone rubber Slightly translucent to allow colour to show through

ETI Protective silicone boots for Therma series

Protective Silicone Boot Extend the life of your probe with this protective silicone boot for Therma series, Food Check and other new style thermometers. Protects against accidental damage Made from durable silicone Available in 6 colours

ETI Therma 20 Damped Air Probe

Therma 20 Damped Air Probe Simulates food temperature in fridges, freezers etc. Maximum probe temperature 150°C. 8 x 30mm with 1000mm FEP lead

ETI Waterproof Thermometer - Dishwasher Safe

Dishwasher Safe Fast Response Waterproof Thermometer Fast response Max/min memory function Supplied with probe cover/wall bracket Easy to use, pocket-sized Waterproof Dishwasher Safe Fast response waterproof thermometers that can also be placed inside a dishwasher to ensure the maximum cycle temperature is correct. Additionally, they can also be used as a conventional food penetration probe thermometer.

ETI Ecotemp Thermometer

ETI EcoTemp Thermometer Temperature range:  -49.9 to 199.9°C Reading speed: 3 seconds Resolution: Selectable 0.1°C  Probe type: 03.5mm x 125mm penetration probe Accuracy: ±1°C (-49.9 to 149.9°C) Sensor: Thermistor Display type: LCD 22mm Backlight: No Size: 20 x 58 x 165mm Battery life: 10,000 hours Battery Type: 2 x AAA Case material: ABS plastic IP Rating: IP65 when silicon boot Guarantee: 1 year

ETI CaterTemp Thermometer & Penetration Probe

ETI CaterTemp Thermometer & Penetration Probe   Temperature range: -49.9 to 299.9°C Reading speed: 3 seconds Resolution: Selectable 0.1°C   Probe type: 130mm penetration probe Accuracy: ±0.4°C (-50 to 199°C) otherwise ±1°C Sensor: K thermocouple Display type: LCD Backlight: No Size: 25 x 56 x 128mm Battery life: 10,000 hours Battery Type: 3 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP65 when silicon boot Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI Raytemp 3 Infrared Thermometer - with LCD display

Raytemp 3 Infrared Thermometer Please note this product has not been medically tested and we cannot guarantee accuracy if being used for this purpose. simple push button operation range -60 to 500°C assured accuracy of ±1°C over the range of 0 to 65°C compact, lightweight & easy to use

ETI Budget Catering Thermometer Kit

ETI Budget Catering Thermometer Kit   The ETI Budget catering thermometer kit is specifically designed for the food and catering industry with a switchable 0.1°C or 1°C resolution. FREE carrying case FREE temperature log book FREE tub of Probe-Wipes 10-14 day lead time

ETI Professional Catering Thermometer Kit

Professional Catering Thermometer Kit Professional catering thermometer kit designed for the food and catering industry. These kits represent excellent value for money as each kit is supplied with FREE carrying case FREE temperature log book FREE tub of Probe-Wipes.

ETI ThermaCheck Thermistor Thermometer With Probe

ETI ThermaCheck Thermistor Thermometer With Penetration Probe Temperature range: -39.9 to 149.9°C Reading speed: 2 seconds Resolution: 0.1°C Probe type: 130 mm stainless steel, food penetration Accuracy: ±0.4°C (-20 to 70°C) Sensor: Thermistor Display type: LCD Backlight: No Size: 25 x 56 x 128mm Battery life: 20,000 hours Battery Type: 3 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP64 when using boot accessory Certification: FREE traceable calibration certificate Guarantee: 2 years Made in the UK

ETI Therma 22 Thermistor - Thermocouple Thermometer (Without Penetration Probe)

Therma 22 Thermistor Thermocouple Thermometer *Penetration probe purchased separately* click here Range -199.9 to 399.9 °C Fast response with high accuracy Wide range of interchangeable probes Case includes Biomaster anti-bacterial additive For Therma 22 probes click here  

ETI Therma 20 Fast Response Thermistor Thermometer

ETI Therma 20 Fast Response Thermistor Thermometer Temperature range: -39.9 to 149.9°C Reading speed: Dependent probe (usually 2 seconds) Resolution: 0.1°C Probe type: Sold separately Connection Type: Lumberg screw Accuracy: ±0.4°C (-25 to 110°C) Sensor: Thermistor Display type: LCD Backlight: No Size: 25 x 56 x 128mm Battery life: 20,000 hours Battery Type: 3 x AAA Case material: Biomaster (Anti-bacterial ABS plastic) IP Rating: IP64 when using boot accessory Certification: FREE traceable calibration certificate European Standard EN13485 Guarantee: 2 years Manufactured in the UK